caute, ako nastavit dhcp server tak aby prideloval ipcky pc na portoch ktore su switchovane? mam to takto
Code: › [admin@quovadis] > interface print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU MAX-L2MTU
0 R ;;; uplink
ether1-gateway ether 1500 1600 4076
1 R ;;; kancelaria
ether2-master-local ether 1500 1598 2028
2 R ;;; televizia
ether3-slave-local ether 1500 1598 2028
3 ether4-slave-local ether 1500 1598 2028
4 ether5-slave-local ether 1500 1598 2028
5 R wlan1 wlan 1500 2290
6 X bridge-local bridge 1500
[admin@quovadis] > ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
0 ;;; default configuration
192.168.88.1/24 192.168.88.0 ether2-master-local
1 ;;; hotspot network
192.168.89.1/24 192.168.89.0 wlan1
2 D 192.168.113.41/24 192.168.113.0 ether1-gateway
[admin@quovadis] > ip dhcp-server print
Flags: X - disabled, I - invalid
# NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP
0 default ether2-master-local default-dhcp 3d
1 hs-dhcp wlan1 hs-pool-6 1h
[admin@quovadis] > ip pool print
# NAME RANGES
0 default-dhcp 192.168.88.10-192.168.88.254
1 hs-pool-6 192.168.89.2-192.168.89.254
pc co je na port2 dostava ipcku logicky ale to co je na porte 3 nie, co treba urobit aby to bolo v jednom subnete a na nom vsetky pc v portoch 2-5 dostavali ip z rozahu 192.168.88.0/24... v bridge je to easy narvat porty do bridge a dhcp server nastavit na bridge ale chcem vyuzit switchovanie chipom, dakujem |
